Abstract
Abstract In this study, effect of sintering temperature on transverse rupture strength (TRS) of Cu-TiC composites produced using hot pressing (HP) technique has been studied. Copper matrix composites reinforced with 10 wt.-% TiC particles were produced under a pressure of 50 MPa, at 600, 700 and 800 °C, and for a sintering time of 4 minutes, respectively. The TRS of the composites were determined using three-point bending test. SEM was used to analyze the fractured surfaces of composites. SEM results showed that with increasing sintering temperature, pores and gaps in the fractured surfaces decreased. The ultimate transverse rupture strength of Cu-TiC composites was found to increase with increasing sintering temperature.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
