Abstract
As a kind of sponge city water-permeable material, permeable brick has good water permeability, chemical stability, corrosion resistance and weather resistance. Therefore, the development of permeable brick also broadens the engineering application market for its application. The discharge of a large amount of manganese slag will cause serious environmental pollution, and the problem of manganese tailings accumulation is serious. There is no ideal treatment method at present. In this paper, manganese tailings slag is used as the main raw material to prepare sponge city permeable bricks, thereby turning waste into treasure. Through research, the permeable brick with MgO used as sintering aid has very low compressive strength and good water permeability. CaO used as a sintering aid has high compressive strength and low water permeability. The porosity and water permeability of permeable bricks increase with the increase of CaCO3, but the compressive strength is opposite. In comparison, the permeable bricks prepared with three different sintering aids, 3% CaCO3 and 2% MgO as sintering aids have good water permeability and superior compressive strength. The permeability coefficient of the permeable brick prepared with 3%CaCO3 and 2%MgO as sintering aids is 2.0×10-2cm/s, and the compressive strength is 1.3MPa.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
