Effect of simulated intraosseous sinusoidal pressure on NaOCl extrusion

Abstract

IntroductionThe present study examined the effects of irrigant flow rate and simulated intraosseous sinusoidal pressure on the rate of NaOCl extrusion from the apical terminus of a faux root canal. MethodsAn extrusion setup was designed to enable irrigant extrusion to be opposed by 30 mm Hg simulated intraosseous pressure. The faux canal apex was opposed by atmospheric + 30 mm Hg pressure (experimental) or atmospheric pressure only (control group). Using five irrigant delivery rates (15.6 8.0, 4.0, 3.4 or 3.0 mL/min), the extrusion rates of 2% NaOCl from the faux apex were measured in both groups (n = 16). Data were analysed with two-factor ANOVA and pairwise comparisons at α = 0.05. Correlation between NaOCl delivery rates and extrusion rates in both groups were analysed with the Pearson product-moment procedure. ResultIrrespective of the presence or absence of simulated sinusoidal pressure, NaOCl extrusion rates were positively-correlated with irrigant flow rates. For the factor “irrigant flow rates”, significant differences in NaOCl extrusion rates were identified among all flow rates (p < 0.05), except for the pairwise comparison between 4.0 and 3.4 mL/min in the control. For all irrigant flow rates, NaOCl extrusion rate was significantly lower in the presence of 30 mm Hg simulated sinusoidal pressure than that obtained in the absence of opposing pressure (p < 0.05). ConclusionIn the presence of 30 mm Hg simulated intraosseous pressure, NaOCl delivered via a side-vented needle inserted to 1 mm short of working length may be prevented from extrusion when its flow rate is ≤ 3.0 mL/min. Clinical SignificanceWhen opposed by intraosseous sinusoidal pressure, NaOCl delivered via a side-vented needle inserted to 1 mm short of working length may be prevented from extrusion when its flow rate is ≤ 3.0 mL/min.