Abstract
Perovskite and textured silicon solar cells were integrated into a tandem solar cell through a stacking method. To consider the effective structure of silicon solar cells for perovskite/silicon tandem solar cells, the optic and photovoltaic properties of textured and flat silicon surfaces were compared using mechanical-stacking-tandem of two- and four-terminal structures by perovskite layers on crystal silicon wafers. The reflectance of the texture silicon surface in the range of 750-1050 nm could be reduced more than that of the flat silicon surface (from 2.7 to 0.8%), which resulted in increases in average incident photon to current conversion efficiency values (from 83.0 to 88.0%) and current density (from 13.7 to 14.8 mA/cm2). Using the texture surface of silicon heterojunction (SHJ) solar cells, the significant conversion efficiency of 21.4% was achieved by four-terminal device, which was an increase of 2.4% from that of SHJ solar cells alone.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
