Effect of silane-modification of diatomite on its composites with thermoplastic polyurethane

Abstract

Diatomite (KG) surface was modified by four different silane coupling agents having amino, epoxy, triamine and octyl functional groups for enhancement of interfacial adhesion between thermoplastic polyurethane (TPU) and diatomite. EDX and FTIR spectroscopy techniques were used to evaluate the surface functionalities of modified and neat KG samples. TPU/KG composites were fabricated using melt-compounding process. Mechanical, thermo-mechanical, thermal, melt-flow and morphological properties of composites were reported. Mechanical tests revealed that tensile strength and hardness of TPU extended to higher levels while its flexibility was retained after KG additions. Epoxy-silane modified KG exhibited the highest results in the case of mechanical properties. Glass transition temperature of TPU shifted to higher values by the additions of modified KG. Thermal stability of TPU raised by KG inclusions regardless of modification type. Modified KG containing composites yield lower MFI values with respect to neat KG. Enhancement of interfacial adhesion between TPU and KG phases was confirmed by SEM micrographs of composites in which silane-modified KG surfaces were covered by TPU matrix. Silane modifiers involving amine and epoxy groups led to significant improvement in properties of KG-filled TPU composites. Epoxy-based silane displayed the highest performances thanks to strong interfacial interactions between epoxy functional group and isocyanate segment of TPU.