Abstract
To investigate the effect of SiC content on microstructure evolution of ZrB2-ZrC-SiC ceramic in sol-gel process. ZrB2-ZrC-SiC powders with different amounts of SiC were in-situ synthesized at 1500 °C through sol-gel method. Ceramization process and effect of SiC content on the microstructure evolution of the ceramic powders were investigated. During the ceramization process, carbon content plays an important role in tailoring the compositions of ZrB2-ZrC-SiC ceramics by enhancing the growth of ZrC and SiC. ZrB2-ZrC-SiC ceramic phases, fine ceramic particles and narrow particle size distribution can be obtained with the increasing of carbon content as a result of its space steric effect. Moreover, grain size of all the phases decreased gradually with the increase of SiC content. Additionally, the introduction of SiC restrained the growth of ZrB2 but prompted the growth of ZrC. Particle size distribution was significantly narrowed and the average particle size of the powders was reduced from 610 to 200 nm when SiC content increased from about 7 wt% to 50 wt%. With the increasing of SiC content, the enhanced synergistic space steric and grain-boundary pinning effect of SiC and carbon contribute to the generation of uniform and fine ZrB2, ZrC and SiC ceramic particles with an average size of 200 nm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.