Abstract
Resin has been widely used for thermosetting printed circuit boards (PCBs) and is a key part of e-waste from scrap PCBs. It requires appropriate treatment because of its harmful elements (metals and metalloids) and organic compounds that are toxic to human health and the environment. The purpose of this study is to eliminate volatile organic compounds (VOCs) and elements (metals and metalloids) in resin via the use of powdered snail shell (Babylonia formosae) in an atmospheric-pressure microwave plasma reactor. Shell powder plays a significant role in the destruction of benzene and toluene with removal efficiency 98.8 % and 100 %, respectively, compared to quartz sand with removal efficiency 44.9 %. A high ratio of shell powder increases the inertization of metals and metalloids by more than 96 %. The crystalline structures of these materials are dominated by calcite formations (CaCO3), confirming the elimination of metals and metalloids. Raman spectroscopy shows that the shell powder vitrifies these elements. The use of shell powder is thus recommended to degrade hazardous substances and to vitrify elements from resin in plasma pyrolysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
