Abstract
Abstract Seabed trenching, related to large motions of relatively taut deepwater mooring systems in the long Gulf of Guinea swell, can reach the suction anchor and the chain padeye depth, thus raising serious concerns about the holding capacity of the suction anchors and the safety of the mooring systems. The potential reduction of the anchor capacity, estimated by means of 3D finite element (FE) calculations, needs to be verified by means of testing, and this is the objective of the study presented here. The paper describes the IFSTTAR geotechnical centrifuge test facility and the model soil preparation procedure for obtaining large open trenches with natural deepwater Angola clay in the swinging centrifuge. The scope of the study includes a number of holding capacity tests on suction anchors without trenches (reference cases) and with large trenches reaching the suction anchor and padeye depth. Tests were performed under vertical and inclined loading (actual case of taut deepwater moorings with significant vertical loading component), with the measurement of pore pressures at different levels below the anchor tip for verifying the effect of the trench on the reverse end bearing (passive suction) capacity. The centrifuge test results are compared with Plaxis 3D FE calculations for the purpose of comparison with previously published results. The preliminary results presented show that the REB capacity is mobilized, even with large trenches reaching the anchor and padeye depth. It is also confirmed that Plaxis 3D FE modelling offers a reliable tool for the assessment of the post-trench holding capacity of the suction anchors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.