Effect of SbCl5 Doping on the Electrical and Optical Properties of Polyamide Nylon 6 Films

Abstract

Polyamide nylon 6 (PA6) films were fabricated using a solution casting method and the films were doped with SbCl5. The electrical conductivity increased with the dopant concentration due to the increase in formation of radical cations through the charge transfer from the isolated double bonds (–C=O–) in the polymer chains. The DC electrical conductivity reached a maximum of 0.01 S/cm for 0.5 ml SbCl5 doped films. Structural and optical characteristics of the pure and doped films were examined using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), X-Ray Diffraction (XRD), and Ultraviolet-Visible (UV-Vis) absorption spectra. The doped films exhibited discernible shifts in the optical band gap energy. The direct band gap values of PA6 films were reduced from 4.5 eV to 1.7 eV when doped with 0.5 ml SbCl5. ATR-FTIR spectral studies, and optical studies indicated the formation of charge transfer complexes with the amide group of nylon 6, resulting in the electrical conduction. The XRD studies disclosed the reduction in the crystallinity of the doped films. The thermal stability was studied using differential scanning calorimetry (DSC) and thermogravimetric analysis-derivative thermogravimetric (TGA-DTG) studies. The melting and crystallization temperatures were recorded from the DSC thermograms. The peak melting temperature of PA6 reduced from 217 °C to 186 °C for 0.5 ml SbCl5 doped films. The peak of crystallization observed at 182 °C for pure films was absent, for the doped samples. The peak degradation temperatures for both pure and doped samples were above 400 °C, revealing the thermal stability of both materials. The thermally stable, semi-crystalline and semiconducting polymer films, we suggest, would be suitable for optoelectronic applications.