Abstract
Abstract The microstructure, surface morphologies and corrosion behavior of 316L stainless steel processed by sandblasting (SB) and sandblasting + acid pickling + passivation (SBPP) were studied in this work. Microstructure of the surface layer was investigated by optical microscope, scanning electron microscope and X-ray diffraction etc. The corrosion behavior was studied by potentiodynamic polarization tests and the surface morphologies were observed by scanning electron microscope. Results indicated that SB and SBPP samples had almost the same microhardness and dislocation density which were higher than the as-received (AR) sample. Besides, strain-induced α’-martensite phase was observed in SB and SBPP samples. After sandblasting, the corrosion resistance decreased dramatically due to the surface morphologies, formation of α’-martensite phase and increase of dislocation density, while it was improved to some extent by the subsequent acid pickling and passivation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.