Abstract
This study investigates the mechanical and physical properties of engineered geopolymer composites (EGCs) consisting of metakaolin (MK) based geopolymer (GP) binder, microsilica sand (MS) or river sand (RS), and polyvinyl alcohol (PVA) fiber. Plain GP matrices and fiber-reinforced composites were studied. Aspects of the material composition evaluated here included binder composition, aggregate type, and fiber content. Compressive strength test results revealed that GP mortars presented greater compressive strength than pure GP binders. Moreover, the addition of PVA fibers produced an important increment in compressive strength while increases in fiber content generally enhanced compressive strength. MS composites tended to produce higher compressive strength than RS composites. While exhibiting low densities (i.e., 1.80–1.94 g/cm3), the composite materials evaluated exceeded the compressive strength of regular concrete (i.e., 30 MPa). Furthermore, the best performing composite presented a compressive strength of 57.5 MPa, thus falling in the category of high-strength concrete. The EGC-like tensile pseudo strain-hardening (PSH) behavior of MK-based GP composites was confirmed by a uniaxial tensile test with MS-composites exhibiting greater tensile strength and ductility compared with RS composites; yet, robust PSH behavior was not achieved mainly because of a lack of proper fiber dispersion. Scanning electron microscopy (SEM) revealed unreacted metakaolin particles in some areas within the geopolymer gel of both GP binders evaluated in this study, suggesting incomplete geopolymerization in the binder. Furthermore, energy dispersive X-ray spectroscopy (EDS) microchemical analysis of a geopolymer gel encountered close agreement between the target composition of the GP binders produced and the actual chemical composition encountered in the specimens evaluated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transportation Research Record: Journal of the Transportation Research Board
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.