Abstract
The aim of this study is to investigate the hybridization effects of intraply carbon/aramid fabric layers with S-glass fabric layers on the tensile and flexural behavior of asymmetric and symmetric arrangements of hybrid composite laminates. The results revealed that the replacement of some carbon/aramid fiber layers with S-glass fiber layers in the composite laminate can provide enhancements in tensile strain, tensile modulus and flexural properties while the tensile strength results were slightly degraded. Three-point bending test results indicated a significant improvement in flexural properties when S-glass fibers employed in compressive side across the depth of composite laminates. The maximum increment in tensile modulus, flexural modulus and flexural strength of hybrid composite laminates were 19.7%, 50.0% and 42.3%, respectively compared to carbon/aramid fiber reinforced epoxy composite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
