Abstract

PurposeThe paper aims to study the influence of rounded corners on the flow-induced oscillation of a square cylinder that is free to oscillate in two degrees of freedom.Design/methodology/approachThe finite volume code in conjunction with the moving mesh scheme was implemented via a user-defined function to carry out the computations in two dimensions. The Reynolds number (Re) chosen for the present study is fixed at 100, and the frequency ratio, Fr = fs/fn (where fs is the vortex shedding frequency and fn is the natural frequency of cylinder) is used as a varying parameter. The computational model was validated for flow past a stationary cylinder with R/D = 0 and 0.5, and the results showed good agreement with the literature.FindingsThe aerodynamic characteristics, amplitude response, trajectories of cylinder motion and vortex shedding modes are obtained by conducting a series of simulations under different frequency ratios of the cylinder. It was found that the minimum transverse amplitude, drag force and lift force obtained for a naturally oscillating square cylinder are quite different when compared with a stationary and forced oscillating cylinder, where the maximum drag and lift forces were observed for a square cylinder and a minimum around R/D = 0.2 was observed.Originality/valueThe present work identified the significant effect of the varying frequency ratio and R/D on the VIV modes of the cylinder. It was observed that the cylinder wake exhibits the (2S) vortex shedding mode for R/D = 0 to 0.2 at all Fr, whereas the C (2S) mode appeared for R/D > 0.2 at Fr = 1.1.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.