Abstract
Amorphous carbon nitride (a-CNx) thin films were deposited using radio frequency plasma enhanced chemical vapor deposition (rf-PECVD) technique. A set of a-CNx thin films were prepared using pure methane (CH4) gas diluted with nitrogen (N2) gas. The rf power was varied at 50, 60, 70, 80, 90 and 100 W. The characterization techniques used were Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscope (FESEM). Humidity sensing properties of the a-CNx thin films were investigated by recording their electrical response to relative humidity (RH) at room temperature. Chemical bonding analysis clearly showed the presence of nitrile bands in the deposited films. The FESEM images of the films show a porous, granule-like and dendritic morphology. The average resistance of the a-CNx thin film is changed from 23.7 kΩ to 5.8 kΩ in the range of 5 to 95%RH. The films show a good response and repeatability as a humidity sensing materials. This work showed that rf power has a significant effects on the chemical bonding, morphology and electrical properties of the a-CNx films.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.