Abstract
The effect of Reynolds number on flow behaviors and pressure drag around axisymmetric conical boattails was experimentally investigated at low-speed conditions. Four conical boattails with slant angles of 12°, 16°, 20°, and 22° were studied. The Reynolds number ranged from 4.34 × 104 to 8.89 × 104 based on the model diameter. The global-luminescent-oil-film skin-friction measurement was employed to analyze the surface skin-friction topology. Quantitative skin-friction values at the centerline were obtained in this study. The results show that a separation bubble can be formed on boattail surfaces at angles from 12° to 20°. However, at a boattail angle of 22°, flow is fully separated near the boattail shoulder. The integrated afterbody pressure drag indicated that, at angles of 12°, 16°, and 22°, the Reynolds number has very small effect on the afterbody drag, while, at 20° the drag coefficient decrease was relatively large with increasing Reynolds number. We believe that this study provided the first results for a boattail angle of 20° and we observed that the size of the separation bubble decreased as the Reynolds number increased. The effect of the separation bubble on the pressure distribution was also examined in detail.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.