Abstract
The effect of residual stresses on the reverse bending fatigue strength of steel sheets with punched holes was studied for steels with tensile strength grades of 540MPa and 780MPa. Tensile and compressive residual stresses were induced around the punched holes. Heat treatment of the specimens with punched holes at 873K for 1h decreased the residual stresses around the holes and improved the fatigue strength of the sheets. This result means that the tensile residual stresses induced in the sidewalls of the holes and near the hole edges by punching reduced fatigue strength. The effect of the residual stresses on the fatigue limits of the edges was estimated by the modified Goodman relation using the residual stresses after cyclic loading and the ultimate tensile strength at the fatigue crack initiation sites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
