Abstract
Hi-Lok fasteners were subjected to multiple collar replacements, and were tested under static loading and constant-amplitude fatigue loading, to determine the effect of repetitive collar replacement on the residual strength and fatigue life of a retained Hi-Lok-type fastener pin. Hi-Lok-type fasteners are typically used in aircraft structural joints, and are loaded mainly in shear. Tests were conducted for clamping force, static shear strength, static tensile strength, and shear fatigue life for collars subjected to five collar replacements. The static shear results showed no decrease in the ultimate shear strength of the fastener pin as a function of collar replacement. Static tensile results showed no decrease in the ultimate tensile strength of the fastener as a function of collar replacement, with failure of the aluminum collar remaining the critical failure mode. Similarly, shear fatigue results showed no decrease in the shear fatigue life of the fastened joint as a result of collar replacement, with fracture of the aluminum substrate remaining the critical failure mode. For static shear, static tension, and shear fatigue tests, estimated clamping force was highly consistent between specimens and no decrease in clamping force was observed as a function of collar replacement.
Highlights
Hi-Lok-type [1] fasteners are used extensively in the aerospace industry, and consist of a threaded fastener pin and collar
The aim of this research was to determine the effect of repetitive collar replacement on the residual clamping force, static strength, and fatigue life of retained Hi-Lok-type fastener pins
Hi-Lok fasteners were subjected to multiple collar replacements and tested to failure under static loading and constant-amplitude fatigue loading
Summary
Hi-Lok-type [1] fasteners are used extensively in the aerospace industry, and consist of a threaded fastener pin and collar. The manufacturer’s installation instructions recommend retention and reuse of undamaged Hi-Lok fastener pins following collar removal [2]; current Royal Canadian Air Force (RCAF) maintenance procedures [3] call for the replacement of an installed aircraft Hi-Lok fastener pin each time the collar is removed. Despite this current practice, it may be preferable from an aircraft maintenance standpoint to remove and replace the collars without replacing the installed fastener pins in some instances. Fhar and Wallace [4] provide a comprehensive discussion of various NDI techniques used to inspect fastener holes in aircraft structures
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
