Effect of relative opening on the moving thin plate under the action of ocean wave in the surging direction: A numerical simulation approach

Abstract

This paper aims to develop the simulated numerical methodology for sloping beach with nonlinear free-surface waves of sloshing water in a 2D rectangular tank. The current computational tool would be the first step in accurately modeling wave energy converters. The 2D tank model was developed by ANSYS FLUENT software, and Navier–Stokes equations are discretized on a regular structured grid based on the finite volume method (FVM). The model is validated for nonlinear sloshing cases. In addition, tank flexibility is analyzed for its impact on liquid sloshing. The test was conducted in five different wave steepness conditions. There were five conditions of wave steepness used in the test. This study looked at fluid–structure interaction around moving plates. The output power of the plate wave energy converter for different plate heights and streamline motion around the plate are important studies in the flow field. Variations of drag coefficient with the wave steepness are the important study in this paper. It shows that the drag coefficient increases with the increase in wave steepness and plate length. In particular, the new structure can give a new, highly accurate formula for determining the wave power of the ocean structures. Its application is seen in wave energy converter (WEC), where the interaction of solid objects, such as wind turbines with water waves, extracts renewable wave energy from the ocean. A highly efficient CFD approach method is introduced to capture the interaction of solid object with a two-phase flow. The effect of wave steepness using second-order stokes wave theory on a moving thin plate in intermediate water is a new discussion. This research is a highly relevant source of information in the development of many practical systems and has direct employment in the design of WEC in order to extract ocean energy.