Abstract
AbstractThe effect of the refining slag composition on the inclusions in molten steel was studied in MgO crucible by using MoSi2 furnace. The experimental steel was heavy rail steel and Si‐Ca‐Ba alloy was used as the deoxidizer. The results showed that the total oxygen content of steel, and the total quantities, total areas and average radius of inclusions decreased with the increased basicity of refining slag. The total quantities and total areas of inclusions were the least when Al2O3 content in refining slag was between 13% and 20%, while the proportion of small inclusions increased when Al2O3 content was higher than 20%. The contents of SiO2 and Al2O3 in inclusions were affected directly by the SiO2 and Al2O3 contents in refining slag, and it was very remarkble when the slag composition was CaOAl2O32SiO2. Therefore, it's feasible to control the composition of inclusions by controlling the composition of refining slag.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Developments in Chemical Engineering and Mineral Processing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
