Effect of reduction ratio on annealing texture and r-value directionality for a cold-rolled Al–5% Mg alloy

Abstract

The evolution of the macrotexture and r-value directionality of cold-rolled Al–5% Mg alloys during annealing at various temperatures was investigated to seek an optimum annealing condition to improve the formability of TRBs. The change of volume fractions for the typical texture components of Al–5% Mg alloys was calculated using a misorientation approach in 3-D Euler space. A visco-plastic self-consistent (VPSC) polycrystal model was used to predict r-value directionality of the cold-rolled and annealed Al–5% Mg alloys. The electron backscatter diffraction (EBSD) technique was used to investigate a rapid change of the initial deformation texture in the specimen deformed by a reduction of 9% during annealing. The results showed that an optimum annealing temperature for achieving the low planar anisotropy was strongly dependent on the rolling reduction ratio.