Abstract
A three-dimensional spray combustion simulation of a carbon black furnace is developed in order to predict the reaction behavior and yield of carbon black. The effect of the raw-fuel flow rate on the soot formation reaction is examined.The experimental furnace used in this study was one fifth the scale of a commercial plant. The light oil (LO) was fed as a fuel and the heavy oil (HO) as a raw-fuel. Both oils were derived from coal tar. Calculated gas temperature, pressure, gas species, and soot yields are compared with experimental data. The following results are obtained;1)An increase of the raw-fuel rate makes the gas temperature lower near the spray nozzles by its latent heat. The high temperature region caused by the heat of incomplete combustion shifts toward the downstream side of the furnace.2)Simulated results show the consumption of oxygen and formation of hydrogen and CO in a few milliseconds, and they are in good agreement with the experimental data.3)It is also found that both acetylene and methane are formed in the furnace. As the raw-fuel flow rate increases, their maximum concentrations become higher and the positions of their maximum concentrations move toward the downstream side of the furnace.4)The soot yield increases as the raw-fuel flow rate increases. The calculated soot yields are in good agreement with the experimental data.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
