Effect of RANSbased Turbulence Models on Nonlinear Wave Generation in a TwoPhase Numerical Wave Tank

Abstract

Ocean waves are the most important exciting source acting on marine structures such as ships, offshore platforms, wave energy converters and wavebreakers. In order to efficiently design the aforementioned structures, accurate modelling of these waves is of importance. In this paper a two dimensional Numerical Wave Tank (NWT) has been established based on the Reynoldsaveraged NavierStokes (RANS) equations for viscous, incompressible fluid and Volume of Fluid (VOF) method and a commercial software code ANSYS FLUENT (Release 15.0) has been used to numerically investigate ocean wave generation. Impact of different turbulence models such as standard k-ɛ, realizable k-ɛ, Shear Stress Transport (SST) and Reynolds Stress Models (RSM) on the generated ocean surface waves were investigated. With all uncertainties associated with various numerical setting aspects, experimental wave measurements over a wide range of wave conditions covering intermediate and deep water regimes have been conducted in a physical wave basin to validate the numerical results. The excessive generation of eddy viscosity resulted from using eddy viscosity turbulence models especially at the free surface interface, leads to a significant unphysical damping on the generated waves. Good numerical agreement with both experimental measurements and analytical wave theory was successfully achieved either with the RSM or implementing artificial turbulence damping at the airwater interface with the SST model.