Effect of quality of separately collected glass, paper plus cardboard and lightweight packaging waste on environmental, energetic and economic sustainability of the material recovery facility operations

Abstract

Low-quality materials contained in separately collected (SC) packaging waste generate environmental and economic burdens associated to both sorting operations of Material Recovery Facilities (MRFs) and landfilling of non-recyclable materials. In this study, based on quantification of both impurities and recyclable fractions, the quality of SC municipal packaging waste streams was determined by compositional analysis of the waste entering a MRF throughout a year. Foreign materials (% w/w) found in the monitored SC glass, paper plus cardboard and lightweight packaging waste, were on average 5.0, 14.7 and 23.0, respectively, while landfilled materials (% w/w) after MRF sorting operations were on average 4.3, 10.3 and 22.0, respectively. A Life Cycle Assessment study was conducted to determine the environmental impact of SC packaging waste streams quality of three different scenarios: current situation (CS), better (BS) and ideal (IS) scenario with reduced presence and absence, respectively, of improper materials in the three examined SC packaging waste streams. Emission of 32.1 kg CO2eq/twaste was calculated for the current situation with a reduction by 66.1% and 98.0% in CO2eq emission for BS and IS scenario, respectively. Similar emission reductions were calculated for ozone depletion, ionizing radiations, particle matter formation, fossil fuel depletion and primary energy demand impact categories. The environmental life cycle costing study demonstrated that total savings of € 35.2 and € 66.6 for each ton of SC packaging waste stream entering the MRF could be obtained for BS and IS scenario, respectively.