Abstract
In this project, the different locations of the quadruple P-spiral split ring resonator (MI-SRR) structure are embedded in the basic rectangular patch antenna. It started with a basic rectangular microstrip patch antenna that simulated in CST Microwave Studio software. After that, four different locations (Location A, Location B, Location C and Location D) of QPS-SRR had chosen to compare its performance of return loss, resonant frequency, surface current radiation pattern, and gain. Location A is representing the antenna with the QPS-SRR at the center part of the patch while Location B has the QPS-SRR at the upper part of the FR-4 substrate. For the Location C and Location D represent the antenna with MI-SRR at the ground at antenna with MI-SRR at the other layer, respectively. Compared with the basic rectangular antenna with only – 27.082 dB, the best return loss was reached by Location A with - 34.199 dB with resonant frequency at 2.390 GHz, while the Location C only shifted the minor value to 2.394 GHz with only - 25.13 dB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
