Abstract
AbstractAmong different MEMS wafer level bonding processes glass frit bonding provides reliable vacuum tight seals in volume production. The quality of the seal is a function of both seal glass materials and the processing parameters used in glass frit bonding. Therefore, in this study Taguchi L18 screening Design of Experiment (DOE) was used to study the effect of materials and process variables on the quality of the glass seal in 6” silicon wafers bonded in EVG520IS bonder. Six bonding process variables at three levels and two types of sealing glass pastes were considered. The seals were characterized by Scanning Acoustic Microscopy (SAM), cross sectional Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Analysis (EDAX). The results were quantified into four responses for DOE analysis. Key results are a) peak temperature has the strongest influence on seal properties, b) hot melt paste has significantly lower defects compared to liquid paste, and c) peak firing temperatures can be as low as 400°C under certain conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
