Abstract
In this study the microstructural and mechanical behaviour of resistance spot welds (RSW) done on aluminium alloy 6082-T6 sheets, welded at different welding parameters, is examined. Microstructural examinations and hardness evaluations were carried out in order to determine the influence of welding parameters on the quality of the welds. The welded joints were subjected to static tensile-shear tests in order to determine their strength and failure mode. The increase in weld current and duration increased the nugget size and the weld strength. Beyond a critical nugget diameter the failure mode changed from interfacial to pullout. Taking into consideration the sheet thickness and the mechanical properties of the weld, a simple model is proposed to predict the critical nugget diameter required to produce pull-out failure mode in undermatched welds in heat-treatable aluminium alloys.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
