Abstract

AbstractThe laser powder bed fusion process for metals (LPBF‐M) results in the development of stochastic surface features that significantly influence the interactions between parts and their surrounding environment, as well as their mechanical properties. The process parameters influence the surface quality, which is quantified by the surface roughness. Therefore, customizing the surface roughness during the build process can significantly contribute to obtaining ready‐to‐use parts, reducing the need for extensive surface posttreatments. This paper utilizes theoretical estimations of melt pool depth under iso‐linear energy density, iso‐power, and iso‐temperature manufacturing process parameter conditions. These estimations are then compared with experimental evaluations of surface roughness and tensile strength in upright‐built specimens to extract the trends in terms of the input energy versus roughness, and the input energy versus tensile behavior. The results show that iso‐energy values yield similar roughnesses due to the consistent expected melt pool depth. Moreover, an increase in melt pool depth generates higher surface roughness, while smaller melt pool dimensions result in improved roughness. Additionally, a comparison between the melt pool size and tensile test performance reveals a detrimental impact on the tensile strength for specimens estimated to have smaller melt pool depths.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call