Effect of Process Parameters on Microstructure and Mechanical Properties in Friction Stir Welding of Aluminum Alloy

Abstract

Friction stir welding process is a promising solid state joining process with the potential to join low melting point materials, particularly aluminum alloys. The most attractive reason for this is the avoidance of solidification defects formed during conventional fusion welding processes. Tool rotational speed and the welding speed play a major role in deciding the weld quality. In the present work an effort has been made to study the effect of the tool rotational speed and welding speed on mechanical and metallurgical properties of friction stir welded joints of aluminum alloy AA6082-T651. The micro hardness profiles obtained on welded zone indicate uniform distribution of grains in the stir zone. The maximum tensile strength obtained is 263 MPa which is about 85% of that of base metal. Scanning electron microscope was used to show the fractured surfaces of tensile tested specimens.