Abstract
The effects of the process parameters of micro-plasma arc welding (micro-PAW) on the morphology and quality of stainless steel edge joint welds were investigated. Micro-PAW was applied on type 304 stainless steels to produce an edge joint weld. Welding experiments were carried out for various combinations of arc current, welding speed, arc length, shielding gas, and clamp distance, with all other operating conditions held constant. The experimental results indicated that the collimated shape of the low current plasma arc was mainly responsible for the low sensitivity of the weld morphology to variations in the nozzle standoff distances. The arc voltage increased with increasing quantity of added hydrogen in the argon shielding gas. It was also found that satisfactory edge joint welds can be formed using a clamp distance of 0.35 mm, and that the edge joint penetration on a 0.1 mm thickness stainless steel is about 60% of the clamp distance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
