Abstract
ABSTRACT Pressure can sometimes be utilized to increase or decrease the strength of adhesion. This phenomenon is analyzed for pull-off of a flat, circular cylindrical punch from a circular membrane. The pressure is applied, and then the punch is pulled upward. Both force control and displacement control are considered, and the pressure may be positive (acting upward) or negative (acting downward) on the membrane. The membrane is assumed to be linearly elastic, and Föppl-von Kármán theory is used to allow moderate displacements. The JKR theory of adhesion is adopted. A transversality (debonding) condition is derived, and then the effects of the work of adhesion, Poisson’s ratio, residual stress, and the relative radius of the punch to that of the membrane are investigated. With an increase in pressure, the pull-off force decreases, the pull-off deflection of the punch relative to the initial flat membrane level increases, and the total pull-off punch deflection from the pressurized membrane may increase or decrease.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have