Abstract
The effect of a 30% predeformation treatment on the high‐temperature oxidation behavior of 436 stainless steel is investigated by oxidizing it at 900 °C for 100 h in air. After 48 h of oxidation, the undeformed sample primarily exhibits bilayer structures consisting of Cr‐rich oxide and outer Fe oxide, while the predeformed sample predominantly displays a single‐layer structure composed of Cr oxide. The oxidation mechanisms of predeformed and undeformed samples are clarified from the point of recrystallization through oxidation kinetic curves, surface and section micrographs, X‐ray diffraction (XRD), electron probe microanalyzer (EPMA), scanning electron microscope (SEM), energy‐dispersive spectroscopy (EDS), electron backscattered diffraction (EBSD), and line scanning characterization methods. The results show that after 1 h of oxidation, the grain size of the undeformed sample is 34.6 μm, and the grain size of the predeformed sample is 16.0 μm. This reduces the critical content required for the generation of protective Cr oxides and provides more diffusion channels for Cr elements, resulting in the formation of a greater amount of Cr oxides. Cr oxides can inhibit the formation of Fe and Mn oxides, thus delaying the onset of breakaway oxidation and improving its resistance to oxidation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.