Abstract
The hot stamping process of ultra high strength steel(UHSS) sheet is an innovative way to manufacture the components with a ultra high tensile strength. The sufficiency of martensitic transformation in formed component is affected by pre-heating temperature of blank directly. In this paper, experiments of heating UHSS blanks to 700°C, 800°C, 900°C and 1000°C were implemented to investigate the effect of pre-heating temperature on the formed component’s microstructure and mechanical properties. The results indicate that 900°C is the best pre-heating temperature for hot stamping process. The microstructure of formed component is all fine and uniform martensite. Meanwhile, tensile strength and vickers hardness raise up to 1580MPa and 450HV, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
