Abstract
Reserves of high-grade gold ore worldwide are decreasing, and some industries have started processing refractory gold ore. Refractory gold ore contains sulfide minerals such as pyrite (FeS2), chalcopyrite (CuFeS2), galena (PbS), and sphalerite (ZnS). Gold in refractory ores occurs as fine-size gold-bearing sulfide minerals. In this study, the microwave-assisted roasting method has been investigated as a pretreatment for a refractory gold ore. This method can provide rapid heating radiation, cause micro-cracks, and trigger the decomposition of sulfide minerals. The presence of additive helps in the oxidation of sulfide minerals. The microwave-assisted roasting was carried out using variations in microwave power and time. Microwave power between 300 - 600 watts significantly affected the increase in roasting temperature and weight loss of refractory gold ore. The highest temperature reached 567°C in roasting at 800 watts for 30 minutes. The optimum condition for microwave roasting was achieved at 400 watts of power with a roasting time of 30 minutes. Metals extraction of Cu, Zn, Pb, and Fe reached 97.2%, 82.7%, 16.1%, and 2.1% in water leaching.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.