Abstract
Electrolyte coatings by atmospheric plasma spraying were prepared by 4.5 mol% ytrria-stabilized zirconia (YSZ) powders manufactured by agglomerate-sintered (A-S) and fusing-crashed (F-C) processes. Microstructure of the powders and the coatings were characterized using scanning electron microscopy. The electrical conductivity of the coatings was investigated using both impedance spectroscopy and DC methods. The results showed that the electrical conductivity of coating prepared with A-S powder was lower than that with F-C powder. It was found from the impedance analysis that both the grain and grain boundary resistances were large in the coating formed by A-S powder. This fact resulted from deposition of partially melting of spray particles. A model was proposed to explain the effect of powder structure and melting state on the coating microstructure and properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
