Abstract
In the planar flow casting process of amorphous strips, the flow behavior of molten metal and the inclusion content in the crucible are crucial to the morphology and magnetic properties of the material. This study conducts a comparative analysis of the effects of non-immersed and immersed funnels, as well as various funnel structures, on the fluid flow and inclusion removal efficiency in the crucible by integrating numerical and physical models. The findings reveal that for the same pouring flow rate, the diameter of the liquid column in non-immersed pouring conditions is smaller than that of the funnel outlet, leading to a faster injection flow velocity. As a result, the melt in the crucible is subjected to severe impacts, accompanied by an increased possibility of slag entrapment. Conversely, immersed pouring substantially reduces the velocity of the molten metal at the funnel outlet, thereby extending the residence time in the crucible and diminishing the volume of the dead zone. Additionally, the molten metal backflows due to the negative pressure formed in the inner chamber of the funnel. The design of a trumpet-shaped funnel increases the effective volume while reducing the height of the backflow fluid, consequently reducing the velocity of the molten metal at the funnel outlet and prolonging the residence time. Compared to the conventional pouring process with the non-immersed funnel, the outlet velocity is reduced from 1.1 m/s to 0.12 m/s by adopting the immersed funnel with an inverted trapezoidal trumpet structure. This reduction results in a stable flow state, a 9.69% reduction in the dead zone volume fraction, and a 22.96% increase in average inclusion removal efficiency. These improvements demonstrate that a crucible funnel with a well-designed structure and the implementation of an immersion process can significantly improve the metallurgical effects in the planar flow casting process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
