Abstract
A commercial window glass has been investigated as a routine high dose dosimeter for gamma irradiation. The irradiated samples showed rapid fading at room temperature immediately after irradiation. This short-term rapid fading was followed by a slow fading at long-term. This strong initial fading is a problem for dosimetry purposes. However, when the dosimeter is measured at the same time interval after irradiation, it maintains proportionality to dose. Calibration curves have to be used for different time intervals after irradiation. In order to improve post-irradiation stability dosimeters were submitted to different post-irradiation thermal treatments from (−20) up to 150 °C. After that, optical absorbance measurements were carried out up to 2 months at room temperature. The heating at 150 °C for 20 min was found to be the most suitable procedure for the removal of unstable entities responsible for the initial rapid fading. Due to these heat treatments, variation of response was found almost negligible 24 h after irradiation for several months. Calibration curves demonstrated the applicability of this glass as routine dosimeter in the dose range of 0.5–90 kGy.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
