Abstract
In this study, we report on the effect of post-annealing treatment on the structure and morphology of Co-doped ZnO (CZO) thin film nano-composites deposited on Si (100) by channel-spark pulsed electron beam ablation (PEBA) from a single target, CoxZn1-xO (x = 0.20). The as-grown CZO films have been deposited within the temperature range 350 °C–450 °C, at electron beam acceleration voltages of 15 kV and 16 kV, and a beam frequency of 4 Hz. The films have been subjected to thermal annealing at either 400 °C or 600 °C for one hour. The effect of post-growth annealing on film properties has been discussed in terms of surface morphology, chemical composition, chemical state, and crystal structure. Experimental results show that, overall, post-annealing treatment significantly affects the structural and morphological properties of the films. Films annealed at 400 °C have higher average particle size and degree of crystallinity of ZnO hexagonal wurtzite structure relatively to the films annealed at 600 °C. Films annealed at 400 °C exhibit larger content in hexagonal close-packed (hcp) metallic Co (Co°) compared to the films annealed at 600 °C and to as-grown films. Both x-ray diffraction (XRD) and x-ray photoelectron spectroscopy (XPS) indicate that enhanced growth of Coо is achieved at the annealing temperature of 400° C.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
