Abstract
A series of pilot-scale pool test fires simulated an idealized fire accident in a storage tank containing low-sulfur No. 6 heavy fuel oil (LSFO6). This work demonstrates that the combustion characteristics of LSFO6 and shows that fire-related emission factors (EFs) of 16 USEPA PAHs during pool fires very much depend on the scale of oil pan diameter (D). Over the range studied (D = 20–60 cm), the combustion characteristics, (i) fuel mass loss rate, (ii) heat flux and (iii) ratio of CO/CO2 as time-weighted averages have positive linear relationships with D, but the combustion efficiency is a negative linear function of D. The sum of 16 PAH EFs has a negative linear function of D, while the overall vapor-particulate partitioning coefficient of 16 PAHs has a positive linear function of D. Most benzo(a)pyrene-toxic equivalents (BaPeq) for a given pool scale arise from high-molecular-weightPAHs. However, the maximum total BaPeq occurs at pool fire scale of D = 40 cm. The scale of burning causes no significant variation in PAH source identifications in terms of the defined molecular diagnostic ratios. Further researches on large-scale pool test fires are needed to validate whether the applicability of pilot-scale studies will be acceptable to the relevant oil tank fires in industries.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
