Effect of Polyvinylpyrrolidone on Separation Performance of Cellulose Acetate-Polysulfone Blend Membranes

Abstract

Blend membranes comprising cellulose acetate and polysulfone (CA/PSf) were prepared through a solution casting method using a different concentration of polyvinylpyrrolidone (PVP) as the pore former. Fourier transform infrared spectroscopy (ATR-FTIR) was used to investigate structural properties of membranes. Membranes morphology and its thermal properties were characterized by scanning electron microscope (SEM) and thermogravimetric analysis (TGA). The strength of membranes was studied by mechanical stability. The effect of PVP concentration on separation performance of the prepared membranes was studied. The separation performance of prepared membranes was tested by using an aqueous solution of cadmium metal complexed with humic acid. The results showed that an increase in the PVP concentration in the cast film from 0 to 3 wt% increased the thermal stability, water content (%), pure water flux, and solute rejection. SEM results showed that the pore size decreased but the number of pores increased on an increase in the PVP concentration.