Effect of polymer matrix on the performance of pressure‐sensitive paint comprising 5,10,15,20‐tetrakis(pentafluorophenyl)porphinato platinum(II) and poly(1,1,1,3,3,3‐hexafluoroisopropyl‐co‐tert‐butyl methacrylates)

Abstract

ABSTRACTCopolymers of 1,1,1,3,3,3‐hexafluoroisopropyl methacrylate (HFIPM) and tert‐butyl methacrylate (TBM) were prepared by conventional radical copolymerization as a novel binders for pressure‐sensitive paints (PSP). The monomer reactivity ratios rHFIPM and rTBM were determined as 0.45 and 0.67, respectively. The glass transition temperature of the copolymers increased from 77 to 126°C with increasing mole fraction of TBM units in the copolymer. The PSP were formed by combining the resulting copolymers and 5,10,15,20‐tetrakis(pentafluorophenyl)porphinato platinum(II). The pressure and temperature sensitivities of the PSPs were measured at air pressures ranging from 5 to 120 kPa and at temperatures ranging from 0 to 60°C. Modified Stern–Volmer plots indicated slight increases in the pressure sensitivity, but significant decrease in the temperature sensitivity as the mole fraction of HFIPM units increased in the copolymer. Applying a theoretical model to our calibration data, we inferred that luminescence quenching is primarily responsible for increasing the temperature sensitivity in the resulting copolymers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43316.