Abstract
AbstractPolymer modified bitumen (PMB) is a binder obtained by the incorporation of polymer into the bitumen by mechanical mixing or chemical reaction. This study deals with the modification of bitumen with three types of polymers (LDPE, EVA, and SBS) in the presence of filler (CaCO3). The morphological, mechanical, rheological properties, and thermal conductivity of the PMBs have been analyzed by scanning electron microscopy, tensile testing, melt flow index (MFI) measurements and hot wire method, respectively. The results indicate that the above‐mentioned properties of PMBs are influenced by polymer and bitumen nature and its composition. The mechanical properties of composites prepared at different temperatures exhibit small differences. In general, the inclusion of polymer increases tensile strength and Young's modulus and reduces percentage strain and MFI values, also, polymer inclusion reduces the thermal conductivity values of the composites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
