Effect of polyhedral oligomeric silsesquioxanes with different structures on dielectric and mechanical properties of epoxy resin

Abstract

AbstractPolyhedral oligomeric silsesquioxane (POSS) is a hybrid material composed of an organic substituent shell and inorganic skeleton core. To study the influence of different shells and cage‐shaped cores on dielectric and mechanical properties, four kinds of epoxy resin composites (EPs) fabricated with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO), DOPO‐containing polyhedral oligomeric silsesquioxane (DOPOPOSS), octaphenyl polyhedral oligomeric silsesquioxane (OPS), and epoxy phenyl polyhedral oligomeric silsesquioxane (EPOSS) with the addition of 5 and 10 wt% were prepared, respectively. The dispersion, transparency, glass transition, dielectric, mechanical tensile, flexural, and impact properties of these epoxy resins were studied. Dielectric constant and loss of EPs were significantly reduced through introduction of three POSSs owing to their inherent hollow cores, and dielectric constant of the resins was further decreased with additional increase. Compared with three POSSs, DOPOPOSS had the best compatible shell, and its composites exhibited favorable transparency similar to pure EP and the obvious reduction in dielectric constant and loss, due to its nano‐dispersion in matrix. EPOSS was dispersed in a perfect spherical shape and uniformly embedded in matrix, and the composites showed good mechanical tensile, flexural, and impact strength. OPS was disorderly dispersed in resins, but its eight phenyl rings symmetrical shell had the advantage of nonpolar molecule structure, which endowed epoxy resin lower dielectric loss over the high‐frequency range (105–106 Hz). Compared with DOPOPOSS, DOPO was effective in reducing dielectric constant and loss of epoxy resin due to its reactive addition, however, it decreased the glass transition temperature, mechanical tensile, flexural, and impact strength of epoxy resin either.