Effect of physical vapor deposition metallic thin films on micro injection molded weld line mechanical properties

Abstract

Micro injection molded polymeric parts coated with functional thin films/layers show off the promising applications in microsystems area. But the unfavorable and unavoidable defect of weld line in micro injection molding part leads to detrimental mechanical and surface properties. The possibility of the functional thin film for enhancing micro injection molded weld lines was investigated. Two typical coating materials (aluminum and titanium) with various film thicknesses (400, 600, 800 nm) were deposited on one side of the micro injection molded weld line tensile sample via physical vapor deposition (PVD) method. The coated micro weld line samples were characterized by tensile tests. The results show that PVD films of aluminum and titanium can reinforce the strength and stiffness of micro injection molded weld line, even at thin thickness levels. But when the film thickness is increasing, the weaker adhesion between metallic films and polymers decreased the PVD films’ enhancing performance for micro weld line mechanical properties due to the degradation of polymers related to longer time exposure under high temperature.