Effect of Perlite Particles on Barite Cement Properties

Abstract

Conventional heavy-weight oil and gas well cement systems formulated with barite exhibit high viscosities. Additionally, the heavy-weight powder tends to settle, causing density variation and disruption in the porosity of the hardened cement cores. Studies have shown that such problems can be mitigated by controlling the particle size distribution of the cement system. The main objective of this study is to evaluate the effect of perlite powder particles on the fluid and hardened properties of barite-based cement systems. Barite heavy-weight cement slurries containing 0, 1, 2, and 3% by weight of dry cement (BWOC) of perlite powder were prepared. The rheological study was performed at a bottomhole circulating temperature (BHCT) of 150 °F and ambient pressure. An ultrasonic cement analyzer (UCA) and a high-temperature–high-pressure (HTHP) curing chamber were used to cure samples for 24 h at a bottomhole static temperature (BHST) of 292 °F and pressure of 3000 psi. Porosity measurements were performed using the nuclear magnetic resonance (NMR) technique. The results indicate that the incorporation of perlite powder into conventional barite-based heavy-weight cement slurry causes modifications in the properties of the systems. In general, the plastic viscosity decreases, while the yield point and gel strength increase with increasing perlite concentration. The reduction in plastic viscosity also reduces the pump pressure, while the increase in yield point and gel strength reduces particle sedimentation. Additionally, the compressive strength and tensile strength of hardened cement increase, while the wait-on-cement time decreases. NMR studies indicate that perlite reduces the porosity variation that exists in conventional barite-based cement systems due to the formation of stable cement systems.