Abstract
This study investigated the effect of poly (ethylene glycol) (PEG) additive as a pore-former on the structure formation of membranes and their permeation properties connected with the changes in thermodynamic and kinetic properties in the phase inversion process. The membranes were prepared by using polyetherimide/N-methyl-2-pyrrolidone/PEG (PEI/NMP/PEG) casting solution and water coagulant. The resulting membranes, prepared by changing the ratio of PEG to PEI, were characterized by scanning electron microscope (SEM) observations, measurements of water flux and γ-globin rejection. The thermodynamic and kinetic properties of the membrane-forming system were studied through viscosity. The pore radius distribution curves were especially obtained by differential scanning calorimetry (DSC). Furthermore, the membranes were characterized for pure water flux and rejection of solute and by SEM observation. The filtration results agreed well with the SEM observations. As expected, PEG with a fixed molecular weight (PEG 600) acted as a pore forming agent, and membrane porosity increased as the PEG content of the casting solution increased.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
