Abstract

Particle size reduction is a crucial factor in transportation logistics as well as cellulosic conversion. The effect of particle size on enzymatic hydrolysis of pretreated Miscanthus x giganteus was determined. Miscanthus was ground using a hammer mill equipped with screens having 0.08, 2.0 or 6.0mm sieve openings. Particle size distribution and geometric mean diameters were determined for all samples. Ground samples were subjected to hot water, dilute acid or dilute ammonium hydroxide pretreatment. Enzyme hydrolysis was conducted on washed pretreated solids; sugar generation was used as a measure for pretreatment efficiency. Glucose and xylose concentrations were monitored using HPLC. Glucose and xylose profiles were generated and hydrolysis rates estimated. Glucose, xylose and total conversion yields were determined by comparing final sugar concentrations obtained to amounts present in pretreated biomass. Geometric mean diameters were the smallest from 0.08mm sieve screen (56μm) followed by 2.0mm (301μm) and 6.0mm (695μm) screens. An increasing trend in percent total conversion was observed with decreasing mean particle size. Across all pretreatments, biomass ground using 0.08mm screens resulted in highest total conversion. Enzyme hydrolysis of unpretreated biomass samples also resulted in increased total conversions as particle size decreased, although mean conversions (10–20%) were much lower than for pretreated biomass samples (53–94%), indicating the need for chemical pretreatments in biomass conversion.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call