Abstract
AbstractFillers are essential component of printing papers to increase the opacity, brightness, and to improve formation and printing properties. As a very little work has been reported so far on magnesium silicate (talc), the study was conducted with the filler of different particle size for papermaking. The sheets were made in the laboratory with refined mixed hardwood chemical pulp with five grades of talc, ground calcium carbonate (GCC) and precipitated calcium carbonate (PCC) fillers with 15–24% ash level. Apparent density along with tensile, burst, tear index, Z‐direction tensile strength (ZDTS) and bending stiffness index were evaluated for talc filled sheets, and compared with GCC and PCC. Physical strength properties of talc filled sheets were decreased at a faster rate on increasing filler loading in paper and decreasing the particle size of the filler. With same type of filler its particle size determines the physical properties of paper. The postulate was not found to be valid for all the three varieties of fillers viz., talc, PCC and GCC. Shape and geometry of the PCC and GCC fillers determine the individual property. © 2012 Canadian Society for Chemical Engineering
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
