Effect of particle morphology on metal dust deflagration sensitivity and severity

Abstract

Combustible dust explosions continue to present a significant threat toward industries processing, storing, or pneumatically conveying metal dust hazards. Through recent years, investigations have observed the influence of particle size, polydispersity, and chemical composition on dust explosion sensitivity and severity. However, studies characterizing the effect of particle shape (or morphology) on metal dust explosibility are limited and merit further consideration. In this work, high-purity aluminum dust samples of three unique particle morphologies were examined (spherical granular, irregular granular, and dry flake). To maintain consistency in results obtained, all samples were procured with similar particle size distribution and polydispersity, as verified by laser diffraction particle size analysis. Scanning electron microscopy (SEM) imaging and Brunauer-Emmett-Teller (BET) experiments were executed to confirm supplier claims on morphology and to quantify the effective surface area associated with each sample, respectively. Investigations performed in a Kühner MIKE3 minimum ignition energy apparatus and a Siwek 20 L sphere combustion chamber resulted in the direct characterization of explosion sensitivity and severity, respectively, as a function of suspended fuel concentration and variable particle morphology. Recommendations to standard risk/hazard analysis procedures and to existing design guidance for the mitigation of deflagrations that originate from ignition of distinctively processed metal dust fuels have been provided.