Abstract
Er-doped phosphate glass ceramics were fabricated by melt-quenching technique followed by a heat treatment. The effect of the crystallization on the structural and luminescence properties of phosphate glasses containing Al2O3, TiO2, and ZnO was investigated. The morphological and structural properties of the glass ceramics were characterized by Field Emission-Scanning Electron Microscopy (FE-SEM), X-ray Diffraction (XRD), and micro-Raman spectroscopy. Additionally, the luminescence spectra and the lifetime values were measured in order to study the influence of the crystallization on the spectroscopic properties of the glasses. The volume ratio between the crystal and the glassy phases increased along with the duration of the heat treatment. The crystallization of the glass ceramics was confirmed by the presence of sharp peaks in the XRD patterns and different crystal phases were identified depending on the glass composition. Sr(PO3)2 crystals were found to precipitate in all the investigated glasses. As evidenced by the spectroscopic properties, the site of the Er3+ ions was not strongly affected by the heat treatment except for the fully crystallized glass ceramic which does not contain Al2O3, TiO2, and ZnO. An increase of the lifetime was also observed after the heat treatment of this glass. Therefore, we suspect that the Er3+ ions are incorporated in the precipitated crystals only in this glass ceramic.
Highlights
Phosphate glasses are of great interest for the manufacturing of photonic devices because of their good chemical stability, easy processing, high rare-earth solubility and excellent optical characteristics [1,2,3,4,5,6].Due to these properties, phosphate glasses containing rare-earth (RE) ions are very attractive for optical communications [7], laser sources, as well as optical fiber amplifiers [8,9,10]
The reference glass ceramic (RefGC) started to be opaque, which is a clear sign of crystallization, whereas the other glasses were still translucent when heat treated at Tp − 40 ◦ C for at least 5 h
A heat treatment at Tp − 40 ◦ C for 12 h led to a complete crystallization only for the RefGC, while all the other glass compositions exhibited a ceramic appearance at the surface due to the surface crystallization and a glassy appearance in the inner part
Summary
Phosphate glasses are of great interest for the manufacturing of photonic devices because of their good chemical stability, easy processing, high rare-earth solubility and excellent optical characteristics [1,2,3,4,5,6]. Due to these properties, phosphate glasses containing rare-earth (RE) ions are very attractive for optical communications [7], laser sources, as well as optical fiber amplifiers [8,9,10]. One of the main advantages exhibited by phosphate glasses with respect to the silica counterpart consists in their ability to incorporate higher doping concentrations of erbium ions within the glass matrix
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.