Effect of palm oil alone or associated to stannous solution on enamel erosive-abrasive wear: A randomized in situ/ex vivo study

Abstract

ObjectivePalm oil has demonstrated preventive potential against initial erosive demineralization in vitro. This in situ study evaluated the effect of palm oil alone or associated with stannous-containing (Sn) solution on preventing enamel loss from an erosive/abrasive challenge. DesignThis single-blind, randomized, crossover in situ/ex vivo study was developed in four phases (one per group of five days) with sixteen volunteers. Enamel blocks (n = 256) were allocated to groups according to the treatment: Palm oil; Palm oil plus Sn solution; Sn solution – positive control; and Deionized water – negative control. Half of the enamel blocks of each group was subjected to erosion and the other half to erosion + abrasion. The daily ex vivo protocol consisted of four citric acid immersions (2 min). Before the first and third acid exposure, the blocks were treated with the test solutions (1 drop/block) for 1 min followed by acid immersion and abrasive challenge (toothpaste was applied on all blocks and half were brushed for 15 s/block). Enamel loss was quantified profilometrically and data were analyzed by two-way ANOVA and Tukey’s test (p < 0.05). ResultsA significant difference was found for type of treatment (p < 0.001); wear condition (p = 0.38) and the treatment x condition interaction (p = 0.33) was non-significant. Palm oil associated or not to Sn solution significantly reduced enamel wear in comparison with the negative control but did not differ from the positive control (p > 0.05). ConclusionsPalm oil was able to prevent enamel loss under erosive and erosive + abrasive challenges in a similar extend to stannous-containing commercial solution.